Suction line accumulator company shares the application of accumulator in hydraulic system

Time of issue:

2022-06-02 08:48

Origin:

1. As auxiliary power supply
The suction line accumulator company said that the actuators of some hydraulic systems are intermittent action, and the total working time is very short. Although the actuators of some hydraulic systems are not intermittent action, but within a working cycle (or within one stroke) Speeds vary greatly. After the accumulator is set in this kind of system, a pump with less power can be used to reduce the power of the main drive, so that the whole hydraulic system is small in size, light in weight and cheap in price.

suction line accumulator company
2. As an emergency power source
Suction Line Accumulator says that some systems require the actuator to continue to perform the necessary actions in the event of a pump failure or power outage (sudden interruption of oil supply to the actuator). For example, for safety reasons, the piston rod of a hydraulic cylinder must be retracted into the cylinder. In this case, an accumulator of appropriate capacity is required as an emergency power source.
3. Supplement leakage and maintain constant pressure
The suction line accumulator company said that for the system where the actuator does not act for a long time but maintains a constant pressure, the accumulator can be used to compensate for the leakage, so that the pressure is constant.