Suction line accumulator factory share the role of accumulators

Time of issue:

2022-05-30 08:44

Origin:

1. As auxiliary power supply
The suction line accumulator factory stated that the actuators of some hydraulic systems are intermittent, and the total working time is very short. Although the actuators of some hydraulic systems are not intermittent, they are within a working cycle (or within one stroke). Speeds vary greatly. After the accumulator is set in this kind of system, a pump with less power can be used to reduce the power of the main drive, so that the whole hydraulic system is small in size, light in weight and cheap in price.
2. As an emergency power source
The suction line accumulator factory stated that some systems require that the actuator should continue to complete the necessary actions when the pump fails or the power is cut off (the oil supply to the actuator is suddenly interrupted). For example, for safety reasons, the piston rod of a hydraulic cylinder must be retracted into the cylinder. In this case, an accumulator of appropriate capacity is required as an emergency power source.

3. Supplement leakage and maintain constant pressure
The suction line accumulator factory stated that for a system in which the actuator does not act for a long time but maintains a constant pressure, the accumulator can be used to compensate for leakage, so that the pressure is constant.
4. Absorb pulsation and reduce noise
The suction line accumulator factory stated that the pulsating flow of the pump will cause pressure pulsation, which will make the movement speed of the actuator uneven, resulting in vibration and noise. A responsive and small inertia accumulator is connected in parallel at the outlet of the pump, which can absorb the pulsation of flow and pressure and reduce noise.