Discharge Muffler manufacturers share the organizational structure of mufflers

Time of issue:

2022-03-27 08:12

Origin:

According to Discharge Muffler manufacturers, the muffler is a noise reduction device installed on the airflow channel of aerodynamic equipment (such as blower, air compressor) or in the intake and exhaust systems. Mufflers can block the propagation of sound waves and allow airflow to pass through, making them an effective tool for noise control.

According to Discharge Muffler manufacturers, the muffler includes the outer shell, the inner shell, the inner and outer partitions, and the inlet and outlet pipes. The muffler shell is welded by double-layer steel plates with a sandwich in between. The inner shell is corrugated and forms an exhaust passage with the inner wall of the outer shell. This structure is beneficial to the attenuation of sound pressure and the diffusion of sound waves, which can enhance the effect of sound reduction. Discharge Muffler manufacturers have found that sometimes the muffler alone still cannot meet the standard of automobile exhaust noise. At this time, it is necessary to install a resonator similar to a small muffler in the exhaust system. A resonator in series with a muffler can further reduce the noise level. Discharge Muffler manufacturers say that the muffler is installed between the catalytic converter and the tailpipe and near the center of the car. But sometimes due to space constraints, the muffler is often installed at the rear of the car. At this time, due to the low temperature of the muffler, more water vapor will condense into water in the muffler, causing the muffler to rust.